Send Message
Guangzhou Ruihe New Material Technology Co., Ltd
products
products
Home > products > Two Part Liquid Silicone Rubber > PAHS Liquid Silicone Rubber Material Two - Part Platinum - Cured Elastomer Injected Into Mold Cavity To Make

PAHS Liquid Silicone Rubber Material Two - Part Platinum - Cured Elastomer Injected Into Mold Cavity To Make

Product Details

Place of Origin: GuangZhou, China

Brand Name: Rui-He

Certification: RoHS, FDA, MSDS, SGS, REACH, PAHS, ISO9001

Model Number: RH6250-0201-3

Payment & Shipping Terms

Minimum Order Quantity: 100KG

Price: USD $+3-7/PER Kilograms

Packaging Details: 20kg pails OR 200Kg / drums

Delivery Time: 5-8days

Payment Terms: L/C, T/T, Western Union

Supply Ability: 1200 tons per month

Get Best Price
Highlight:

2 part rubber silicone mold compound

,

2 component silicone rubber

Features:
Injection Molding
Shelf Life:
12months From Production Date
Usage:
Making Mold
Sample:
Available
Hs Code:
39100000
Packaging:
1kg/5kgs/10kgs/20kgs/25kgs/200kgs
Shrinkage:
Less Than 0.1%
Ratio:
1:1
Liquid Silicone Rubber:
Liquid Silicone
Certificate:
RoHS, FDA, MSDS, SGS, REACH, PAHS, ISO9001.
Features:
Injection Molding
Shelf Life:
12months From Production Date
Usage:
Making Mold
Sample:
Available
Hs Code:
39100000
Packaging:
1kg/5kgs/10kgs/20kgs/25kgs/200kgs
Shrinkage:
Less Than 0.1%
Ratio:
1:1
Liquid Silicone Rubber:
Liquid Silicone
Certificate:
RoHS, FDA, MSDS, SGS, REACH, PAHS, ISO9001.
PAHS Liquid Silicone Rubber Material Two - Part Platinum - Cured Elastomer Injected Into Mold Cavity To Make

A Liquid Silicone Rubber material is a two-part platinum-cured elastomer can be injected into a mold cavity to make

 

 

Product description

 

Ruihe RH6250 SERIES Liquid Silicone Rubber (F-LSR) is specifically designed for liquid injection molding.

 

The product is supplied as a two component, soft fluorosilicone paste. It heat cures to a 60 durometer material.

 

The cured rubber product is resistant to a wide variety of solvents and chemicals over a wide temperature range

 

of -63 to +175°C (-82° to +347°F) under immersion conditions, and up to +225°C (+437°F) in dry heat.

 

 

 

 

Application

These grades are particularly suitable for the economical production of large series of injectionmoulded articles.

Parts made from RUI-HE RH6250-50 can be used for technical and pharmaceutical applications.

These articles are also suitable for use in conjunction with foodstuffs.
 
 
PAHS Liquid Silicone Rubber Material Two - Part Platinum - Cured Elastomer Injected Into Mold Cavity To Make 0
PAHS Liquid Silicone Rubber Material Two - Part Platinum - Cured Elastomer Injected Into Mold Cavity To Make 1
 
Processing
 
Mixing
 
Rui-he RH 6250 series Liquid Silicone Rubber is a two-component material supplied  as parts A and B,
 
which should be combined in a 1:1 ratio. Meter mix equipment which  pumps, meters, and mixes
 
the two components without the incorporation of air is strongly  recommended for production.
 
 
Pot Life
 
After the A and B components are mixed,  Liquid Silicone  Rubber will remain usable for at least 48 hours at room temperature.
 
 
 
Storage
 
The 'Best use before end' date of each batch is shown on the product label.
 
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
 
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
 
 
Physical properties Testing method Unit RH6250-40A/B RH6250-50A/B RH6250-60A/B RH6250-70A/B RH6250-71A/B
Appearance Visual inspection / Transparent
Viscosity DIN53019 Pa.s 1200 1200 1500 2000 2500/
Hardness GB/T 531.1 Shore A 40 50 60 65 70
Density

GB/T

533

g/cm3 1.11 1.12 1.12 1.13 1.13
Resilience

GB/T

1681

% 55 65 60 55 55
Tensile Strength GB/T 528-2009 Mpa 7.5 9 9.5 9.5 9
Elongation GB/T 528 % 550 550 500 400 350
Tear Strength GB/T 529 KN/m 25 30 35 30 25
Tensile Set GB/T 528 % 2.6 1.7 1.7 0.8 0.8
Linear shrinkage CGB-T14235.4 % 2.5 2.6 2.6 2.5 2.5

 

 

PAHS Liquid Silicone Rubber Material Two - Part Platinum - Cured Elastomer Injected Into Mold Cavity To Make 2

 

PAHS Liquid Silicone Rubber Material Two - Part Platinum - Cured Elastomer Injected Into Mold Cavity To Make 3
 
 
 
CONTACT US
 
For more than 15 years, OEM designers and maintenance and materials engineers around the world have trusted
the Rui-he brand for performance and expertise to solve or prevent sealant challenges.
 
Rui-he has sales offices, manufacturing sites, and science and technology laboratories – and a network of more than 200.
 
To learn more about our extensive product and service offerings, order samples, visit lsrliquidsiliconerubber.com
 email: chenp8008@@gmail.com or call  at(wechat//whatsapp) +86 136 6016 5505.